Welcome all kinds of custom-designs to be fit for your project

What are 9BB half-cut solar cells? or we call half-cell solar panel?


Why we want to choose 9BB half-cell Solar Panels? 

Half-cut solar cells are exactly what their name suggests – they are traditional silicon solar cells that have been cut in half using a laser cutter.

Half-cut cells provide several benefits over traditional solar cells. Most importantly, half-cut solar cells offer improved performance and durability. Performance-wise, half-cut cells can increase panel efficiencies by a few percentage points. And in addition to better production numbers, half-cut cells are more physically durable than their traditional counterparts; because they are smaller in size, they’re more resistant to cracking.

Due to these advantages, solar panels built with half-cut solar cells have the potential to provide quicker solar payback periods for property owners installing solar energy systems. Especially for installations where shading and limited space are constraining factors, half-cut cells can make a solar panel installation even more worth the upfront cost.

How do half-cut solar cells improve panel performance?

There are a few main ways that half-cut cells can boost solar panel output and performance:

1. Reduced resistive losses

One source of power loss when solar cells convert sunlight into electricity is resistive losses, or power lost during electrical current transport. Solar cells transport current using the thin metal ribbons that cross their surface and connect them to neighboring wires and cells, and moving current through these ribbons leads to some energy lost. By cutting solar cells in half, the current generated from each cell is halved, and lower current flowing leads to lower resistive losses as electricity moves throughout cells and wires in a solar panel.

2. Higher shade tolerance

Half-cut cells are more resistant to the effects of shade than traditional solar cells. This is not due to the cells being cut in half, but rather a result of the wiring methods used to connect half-cut cells in a panel. In traditional solar panels built with full cells, the cells are wired together in rows, known as series wiring. In series wiring schemes, if one cell in a row is shaded and not producing energy, the entire row of cells will stop producing power. Standard panels typically have 3 separate rows of cells wired together, so shade on one cell of one row would eliminate a third of that panel’s power production.

Half-cut cells are also wired in series, but because panels made with half-cut cells have double the number of cells (120 instead of 60), there are also double the number of separate rows of cells. This type of wiring allows panels built with half-cut cells to lose less power when a single cell is shaded because a single shaded cell can only eliminate a sixth of the total panel power output.

Cell cutting is done with a laser and involves splitting standard solar cells into two halves. Solar cells can be very fragile, and laser cutting allows for precise lines to be cut into solar cells.

As with cell cutting, the stringing process needed when making half-cut cells is a very precise task. Stringing is the process of placing the conductive strips, known as busbars, on each half-cut cell. Due to the smaller size of half-cut cells, the busbars used are smaller and require specialized equipment to accurately place them.

“By delivering more power per square meter, fewer panels are required to generate the same power, This means quicker installation times and the need for fewer components such as clamps and racks—all of which reduces the overall costs.”

Update our production line and supply more high power solar panels, connect us soon for more information about half cell panels.

 

Know more details to check www.trsolarchina.com or: https://www.youtube.com/channel/UCAg_8dqd8m1cPVnpPTK-Keg

0 comentarios

  • ¡Su comentario se ha compartido con éxito! ¡Gracias!

Dejar un comentario

Por favor tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados